|
|
|
The LidJet™ holds your lids on any vertical
surface.
"Put a lid on it!" Quick and Simple
|
|
Free-Slide Version:
Just put the top lip of the lid in the "nose" hook of LidJet,
push it up until the bottom clears the hooks on the "wings," and let
it go!
To remove, lift slightly and take it out.
|
|
|
Fixed-Slide Version:
Simply place the lid on the "wing" hooks, press down lightly and snap the
top of the lid into the "nose" hook.
To remove, push down lightly and snap out.
|
|
|
Installation:
The LidJet comes with an adhesive backing for
quick installation. It can also be mounted permanently with two small screws,
supplied. We recommend that if you are are using very heavy lids, such as
cast-iron, you use the mounting screws. For most lids the adhesive is
sufficient.
|
|
Installing or Changing the Fixed-Slide Version:
This mock-up uses a set screw to "fix" the position of the slide.
Just release the screw, adjust the LidJet to the diameter of the
new lid, and tighten the screw.
|
|
|
|
